2012-2013 Epic Planks Tech Specs and Mounting Points

Now that the 2012-2013 product line is hitting the shelves you might find this post handy! Take a look here if you’re looking to buy and are interested in the nitty gritty, or if you need to know where to throw the bindings on your new sticks.

Crop Duster

Construction:
Poplar Core / Full Vertical Sidewall / Tip & Tail Rocker / Zero Camber / Directional Twin

Dimensions:
175cm – 143/114/133
185cm – 151/122/140

Turning Radius:
175cm – 22.5m
185m – 26.3m

Recommended Mounting Position (Boot Sole Center):
175cm – 81cm from tail (pow); 85 (freeride)
185cm – 86cm from tail (pow); 90 (freeride)

 

Ripper

Construction:
Poplar Core / Full Vertical Sidewall / Early Rise / Camber / Directional Twin

Dimensions:
175cm – 133/98/125
185cm – 139/104/130

Turning Radius:
175cm – 15.6m
185cm – 17.2m

Recommended Mounting Position (Boot Sole Center):
175cm – 82cm from tail
185cm – 86cm from tail

 

Vaporizer

Construction:
Poplar Core / Full Vertical Sidewall / Tip & Tail Rocker / Camber / True Twin

Dimensions:
165cm/175cm/185cm – 117/93/117

Turning Radius:
165cm – 17.5m
175cm – 20m
185cm – 23.4m

Recommended Mounting Position (Boot Sole Center):
165cm – 82cm from tail
175cm – 87cm from tail
185cm – 92cm from tail

Stash AMP /Park

Construction:
Spruce & Ash Core / Full Vertical Sidewall / Reverse Camber

Specs:
148 Park – 287-248-287 – R 7.6m 80-150 LBS
152 Park – 291-251-291 – R 7.9m 90-170 LBS
155 Park – 295-254-295 – R 8.1m 100-190 LBS
157 Park – 297-255-297 – R 8.3m 120-230 LBS
157 AMP – 297-255-297 – R 8.3m 120-240 LBS
157 AMP WIDE – 323-280-323 – R 8.2m 130-250 LBS
160 AMP – 295-250-295 – R 7.9m 130-250 LBS
163 AMP – 310-261-310 – R 8m 140-260 LBS
163 AMP WIDE – 330-281-330 – R 10m 150-270 LBS

2 Responses to “2012-2013 Epic Planks Tech Specs and Mounting Points”

  1. Rob Boersma says:

    What size of drill bit should be used to drill these skis?

  2. admin says:

    3.5mm drill bit, 9.5mm deep for all of our skis.

Leave a Reply